膠粘劑生產過程中的voc廢氣排放量較高，有必要對于這部分廢氣進行收集處理，這樣可以改善車間內部的工作環境，也可以達到大氣排放標準，本文由昆山鑫藍環保小編帶您了解一下膠粘制品廢氣處理采用的方法吧。

The VOC exhaust emissions during the adhesive production process are relatively high, and it is necessary to collect and treat this part of the exhaust gas. This can improve the working environment inside the workshop and meet the atmospheric emission standards. This article is led by Kunshan Xinlan Environmental Protection Editor to introduce the methods used for the treatment of adhesive product exhaust gas.

一、活性炭吸附箱：活性炭是一種多孔的含碳物質，其發達的空隙結構使它具有很大的表面積，所以很容易與空氣中的有毒有害氣體充分接觸，活性炭孔周圍強大的吸附力場會立即將有毒有害氣體分子吸入孔內，從而達到凈化有機廢氣的目的。

1、 Activated carbon adsorption box: Activated carbon is a porous carbon containing substance with a developed pore structure that gives it a large surface area, making it easy to come into full contact with toxic and harmful gases in the air. The strong adsorption force field around the activated carbon pores will immediately suck toxic and harmful gas molecules into the pores, thereby achieving the goal of purifying organic waste gas.

二、催化燃燒設備：催化燃燒能解決有機廢氣污染問題，有機廢氣在溫度相對較低（與直接燃燒溫度相比）的情況下，完全氧化成二氧化碳和水，無任何中間產物。可以很好地處理膠粘制品行業廢氣。催化燃燒與其他廢氣處理設備相比如下，傳統的活性炭吸附，是將污染物轉移，氣態被活性炭吸附后成固體，活性炭飽和后將無吸附能力，此時需要更換活性炭，且原有的活性炭變成危廢，處理成本高。

2、 Catalytic combustion equipment: Catalytic combustion can solve the problem of organic waste gas pollution. Organic waste gas is completely oxidized into carbon dioxide and water at relatively low temperatures (compared to direct combustion temperature), without any intermediate products. It can effectively treat the waste gas from the adhesive products industry. Compared with other exhaust gas treatment equipment, catalytic combustion uses traditional activated carbon adsorption to transfer pollutants. The gas is adsorbed by activated carbon and becomes a solid. When activated carbon becomes saturated, it has no adsorption capacity and needs to be replaced. Additionally, the original activated carbon becomes hazardous waste, resulting in high treatment costs.